Accessories - NTN-SNR LINEAR AXIS AXC Series Manual

6.

Accessories

6.1 Fastening and connecting elements
For the assembly of NTN-SNR - Linear Axis is a perfectly matched range of fastening elemets available. Sliding blocks, fastening strips
and an extensive range of connecting elements offer manifold possibilities to fix the axis on mounting surfaces or to combine axis.
As fasteneing and connecting elemets the following components are available:
• Fastening strips and fastening elements
• Sliding blocks
• Hammer screws
• Direct connections
• Cross connections
• Gantry connections
• A –Standard connection
• Angle connections
6.1.1 Fastening strips / fastening elements
Fastening strips and fastening elements (Figures 6.1 and 6.3) are available for Linear Axis of the series AXC, AXDL and AXF.
The distance between the fastening points should be selected depending on the load and the required straightness and the rigidity.
The dimensions and type codes, including the ID - Numbers are shown for Linear Axis of the series AXC and AXDL in Figure 6.2 and
Table 6.1 and for Linear Axis of the AXF series in Figure 6.4 and Table 6.2. For Linear Axis of the AXF series, the dimensions J and F
(Chapter 5.3.1.2 and 5.3.2.2) as well as the number of fastening elements must be specified.
Figure 6.1 ___ Linear Axis AXC fastening strips
164