Mounted Gearboxes - NTN-SNR LINEAR AXIS AXC Series Manual

6.2.3.3 Mounted gearboxes

Linear Axis of the AXS series are normally delivered with mounted gearboxes. For Linear Axis with rack and pinion drive and telescopic
axis is the pinion directly mounted on the gearbox shaft and exactly aligned to the rack during assembly.
The Linear Axis AXS280Y is produced with integrated planetary gearbox in the version ZP. The data of these version are described
in chapter 6.2.3.
In the Linear Axis AXS280Z the gearbox is mounted by a coupling. The specifications of this are described in chapter 6.2.4.
Depending on the type different gearbox types (Table 6.21) can be used with a variety of gear ratios. The gearbox is configured for
the respective application. For more information please contact our NTN-SNR application engineers.
Table 6.21 __ Gearboxes for Linear Axis AXS with rack and pinion drive and telescopic axis
Type Axis version
AXS110TA Telescopic Axis
AXS200MP Lifting Axis
AXS200MS Lifting Axis
AXS200MB Lifting Axis
AXS230MB Lifting Axis
AXS280MB Lifting Axis
AXS280P Gantry Axis
AXS460P Gantry Axis
AXS120TH Telescopic Axis
AXS120TV Telescopic Axis
AXS240TH Telescopic Axis
AXS280TH Telescopic Axis
AXS280TV Telescopic Axis
6.2.4 Adapters / Coupling cones
6.2.4.1 Linear Axis toothed belt drive
The simplest way to connect a gearbox or drive with the Linear Axis is the direct insertion of the drive shaft into the hollow shaft of the
drive pulley. The drive is screwed via a flat adapter plate with the Linear Axis. The power transmission is form-fitted by a feather key.
The only prerequisite is that the diameter of the drive shaft corresponding to the respective hollow shaft diameter of the Linear Axis. In
Table 6.22 the code numbers and dimensions for each Linear Axis are summarized and in the dimensions are shown in Figure 6.33.
Table 6.22 __ Code numbers and dimensions for form-fitted drive adaptions
Code
Type Design type
number
A VC065-E0
AXC40ZF
AXC40AF
C B14 C40
A B14 C60
AXC60ZF
B VC065-E0
AXC60AF
C B5 C120
A B14 C80
AXC80ZF
AXC80AF
E B5 C120
A B5 C120
AXC100Z B B14 C120
C B5 C160
AXF100ZF A B5 C120
A B5 C120
AXC120ZF
C B5 C200
AXC120AF
F B5 C115
1 - Design type E0 contains the delivery of a special plug-in shaft with Ød
X: Code number for special adapters
Gearbox version Gear ratio i
Planetary gearbox 3...100
Planetary gearbox 3...100
Spur gearbox 3,83...176,88
Bevel gearbox 4,64...131,87
Bevel gearbox 5,20...144,79
Bevel gearbox 7,24...192,18
Planetary gearbox 3...100
Planetary gearbox 3...100
Bevel gearbox 3...10
Bevel gearbox 3,19...54,89
Bevel gearbox 4,64...131,87
Planetary gearbox 3...100
Bevel gearbox 5,20...144,79
e2 a s1
[mm] [°]
1 54 0 4 x Ø 6,5
34 45 4 x Ø 4,3
52 45 4 x Ø 5,5
1 54 0 4 x Ø 6,5
100 45 4 x M6 x 8
70 45 4 x Ø 6,5
100 45 4 x M6 x 12
100 45 4 x M6 x 12
100 45 4 x Ø 6,5
130 45 4 x M8 x 12
100 45 4 x M6 x 12
100 45 4 x M6 x 12
165 45 4 x M10 x 20
100 45 4 x Ø 11
b2 d i2 i2
max.
[mm] [mm] [mm]
44 12
26 10 31
40 14 47
44 14
80 14 50
60 20 71
80 20 72
80 25 82
80 25 82
110 25 82
80 25 82
80 30 107
130 30 119
80 25 113
186
-l k2 a2
max.
[mm] [mm] [mm]
20,0 64,5
4,0
5,0 60
18,0 70 80
8,0 100 120
12,0 82
12,5 120
17,0 103 120
17,0 100 115
17,0 115 145
17,0 103 120
13,0 120
25,0 200
7,0 120
L2
[mm]
20,5
3,1
5,0
18,0
8,0
12,0
12,5
12,0
12,0
12,0
12,0
13,0
25,0
16,0