8.3.2
Safety options
Depending on series, size and drive type is it possible to equip the Linear Axis with additional safety options. The possible options are
not always useful and available for all sizes of a series.
As safety options the following versions are possible:
•
Safety nut for vertical axis with ball screw drive
•
Safety break (Chapter 6.9) for vertical axis (Figure 8.1)
•
Collision protection for vertical axis with ball screw drive
Figure 8.1 ___ Lifting - Axis with safety break
This options can only be selected after consultation from one of our NTN-SNR application engineers.
227