Drive Calculation - NTN-SNR LINEAR AXIS AXC Series Manual

2.12

Drive calculation

• NTN-SNR provides, as a customer service, the assembling of drives provided by the customer.
• NTN-SNR assumes no warranty for the calculation of the provided drive.
• Calculations of drives are carried out exclusively by the respective drive manufacturer.
• The reason for this is that NTN-SNR does not have all necessary calculation tools and basic data of these drives.
2.13 Selection of Linear Axis with toothed belt drive for 90 ° tilt mounting
For Linear Axis with a toothed belt drive in a 90 ° tilted arrangement (wall mounting), the toothed belt can be displaced downwards
during operation by the gravity force to the flanged pulley. For this reason, we recommend not to exceed the stroke limit length
specified in Table 2.2.
Table 2.2 ____ Stroke limit length for Linear Axis with toothed belt drive
Series
AXC
AXDL
AXF
AXS
If the mounting of the Linear Axis is provided in this position, this information is required in the order description.
During operation, the centered run of the toothed belt must be checked together with the maintenance of the Linear Axis specified
in Chapter 4.7.
Type Stroke limit length [mm]
AXC40Z
AXC60Z
AXC80Z
AXC100Z
AXC120Z
AXDL110Z
AXDL160Z
AXDL240Z
AXF100Z
AXS280Z
21
1500
2000
2500
3000
3000
2000
2500
3000
3000
3000
(wall mounting)