1.3.4
Status LED Indicator
There are 3 LED indicators on the front of the ADAM-6100 module-Status/COM, Link/
Speed 1, and Link/Speed 2. The Status/COM LED indicates the status of the module.
The Link/Speed LEDs indicate the network connections of Ethernet port 1 and port 2.
After power on, if the module is not connected to any network, the Status LED and
the COM LED will keep ON. Once the module is connected, the Status LED and
COM LED will work according to the table below.
Status of the module
Mode
Init mode (Utility mode)
Normal mode (PROFINET mode) Flashes ON/OFF
"Locate" function in normal mode
(PROFINET mode)
Port Communication
Mode
Port 1 connected
Port 2 connected
Status LED (Green) COM LED (Orange)
Stays OFF
Flashes ON/OFF
OFF when no PROFINET
communication;
ON during PROFINET
communication
Flashes ON/OFF at the same time
Link LED (Green)
Speed LED (Orange)
Link 1 blinks ON
Speed 1 ON when network speed
is 100M
Link 2 blinks ON
Speed 2 ON when network speed
is 100M
5
ADAM-6100PN Series User Manual