Transferring The Image Data - Horizon Fitness QC-S300 Manual

1 General

1 - 5 Transferring the Image Data

1
Transferring the Image Data
1 - 5 -
• Control program of the machine or a screen data is
updated because of the mechanical or software
improvement. Following three programs are updated.
- Control Program Data
- Image Data of the Screen
- Screen Switching Program
• Screen data on QC-S300 can be updated by trans-
ferring the new data from your PC. This section
explains how to update the screen data.
Preparation
Download the new program.
• Order a version up screen data from a factory, and
download the data to your PC.
- Icon [H] is on is shown on the desk top of your PC.
Prepare for the serial cable connection.
Board
Serial Cable
2m
9 pin 9 pin 9 pin
female female
male
Transferring Step
Turn on the SW7 on DSW1 (Fig1).
• Turn on only the SW7 of the DSW1 on LCD control
board QPM-208.
Connect the serial cable.
• Connect the board and the PC using the serial cable
and the adapter.
Turn on the power switch.
• Turn on the power of the collator.
LCD Panel turns white.
Turn on your PC.
Double click on
• Double click on the [H] icon on the desk top.
PC
Transferring Window opens. (Fig2)
USB
Click on [START].
To use this adapter,
- After [Erasing] has blinked (= the old data has been
the driver is required.
erased), transferring starts.
If the driver is not
attached to the • When the [Completed] appears, transferring has
adapter, download
been completed.
the driver from the
home page of the
manufacturer.
Turn off the SW7 on DSW1.
51041
• Turn off the power switch, and turn the SW7 on
10401A1
DSW1 off.
1 - 5 - 1 Transferring the Image Data
.
H HFW2_RT 0.1
H
Turn on the SW7 of DSW1 on QPM-208
and click on the start button below
Erasing Programing
Select Port
Old data is being
deleted.
Q C - S 3 0 0
Connect the
serial cable here.
LCD Control Boar
ON
QPM-208
CPU CPU
Turn on the
switch "7" only.
Fig.1 LCD Control Board
Data Transfer
Window
QC-S300pic_v095
New data is
transferred.
START
HFW2_RT 0.1
Completed!
OK
Transfer is completed when
this window appears.Press OK.
Fig.2 Transferring Window
1-12
OFF
41042
10401B1
51041
10401C1