Model Of The Collator And Configuration; Board - Horizon Fitness QC-S300 Manual

1 General

1 - 1 Model of the Collator and Configuration

1
Table for Model of the collator and Configuration
1 - 1 -
Model
Items
Panel

Board

Bin Up Mechanism
Sheet Detect Switch
Sheet Pass Sensor
Energy Saver Mode
Power Consumption
Weight
*1 Double feed detection by photoelectric sensor.
If the overlapped sheets are shifted 30 mm or more to the feeding direction,
the time that the photoelectric sensor is activated becomes longer.
Double feed is detected by this time lag. (If the shifted amount is
30 mm or less, double feed cannot be detected.)
*2 QC-S300F/30F has a conveyor motor M02 (40 W).
QC-S300
Color LCD and Touch Panel
QPM-208 LCD Board and Inverter Board
Bin is raised automatically by M04 Bin Up Motor.
Sheets are detected by micro-switch S11-S20.
Light transmission type (Double feed and misfeed is
detected by the optical transmission amount).
Filament lamp is required to replace.
After preset time has passed, back light of the LCD
and the lamp of the sheet pass sensor turns off.
1.4A (115V/60Hz) 1.8A (115V/60Hz)
0.7A (230V/50Hz) 0.9A (230V/50Hz)
0.8A (230V/60Hz) 0.9A (230V/60Hz)
73kg 80kg
1 - 1 - 1 Table for Model of the collator and Configuration
QC-S30
QC-S300F
LED Monitor and Push Button
No LCD Board, No Inverter Board
Bin is raised manually by the Bin Lever.
No detect mechanism. Machine knows by misfeed.
Photoelectric Sensor (detected by On/Off)*1
LED lamp replacement is not required.
-
2.3A (115V/50Hz)
1.3A (115V/60Hz)
0.6A (230V/50Hz)
0.7A (230V/60Hz)
73kg
QC-S30F
2.5A (115V/50Hz)
1.5A (115V/60Hz)
0.8A (230V/50Hz)
0.8A (230V/60Hz)
80kg
1-2