Service Mode Screen-P2 - Horizon Fitness QC-S300 Manual

1 General
1 - 3 Service Screen
4

Service Mode Screen-P2

1 - 3 -
P2 Service Mode Screen
1
General
(4/6)
When deliver to the right
(Several Towers)
- If the value is increased, gap between the
sheets becomes bigger.(*)
- If the value is decreased, gap between the
sheets becomes smaller, and then shifted to
the opposite side.
When deliver to the left
(Several Towers)
- If the value is increased, gap between the
sheets becomes smaller, and then shifted to
the opposite side.(*)
- If the value is decreased, gap between the
sheets becomes bigger.
Double Feeding Detect Sensitivity
Adjustment
- Double feeding detect sensitivity changes
according to the sheet weight, sheet thickness
and printing condition. This section explains
how to change the double feeding detect
sensitivity.
51041
10304A1
No Detection of Misfeed for Thin Sheets
- When running thin sheets, amount of light
received became big, so the misfeed may be
detected. This section explains how to
change the threshold value to let the thin
sheets pass without error.
-direction
-99
-direction
-99
- If the value is increased, sensitivity becomes high.
- If the value is decreased, sensitivity becomes low.
- Input range is from -79 to +19.
- If the value is increased, threshold becomes high and the
sheets are easy to pass.
- If the value is decreased, threshold becomes low and the
sheets are difficult to pass.
- Input range is from -99 to +99.
1 - 3 - 4 Service Mode Screen-P2
Q C - S 3 0 0
Standard +direction
51041
0 +99
10304B1
Standard +direction
0 +99
51041
10304C1
1-7