Gerber Technology GERBERplotter MP Series User Manual page 16

Energized circuits
Ensure the power cord is grounded and correctly connected. Circuits must be de-energized before trained person-
nel can work safely. There must be a main switch that is compatible with local electrical codes to de-energize each
power supply.
Do not operate in an explosive atmosphere
Use caution when handling flammable liquids, such as cleaning solvents. Do not operate equipment near flammable
gases.
Moving machinery
Keep hands away from all moving plotter parts to prevent personal injury. Make sure no one else is near the plotter
during operation.
Replacing parts
Notify a Gerber Field Service Representative of any broken or missing parts.
Do not use parts or modifications that are not approved by Gerber Scientific, Inc., because equipment damage or
personal injury could result.
Clothing
Do not wear loose clothing, neck chains, neckties, jewelry, or have long hair near the plotter.
Failure to comply could result in personal injury.
Ink cartridges
Refilling cartridges or using incompatible inks could result in equipment damage.
Use only approved ink cartridges from Gerber Scientific, Inc.
Ink hazards
If removed from the ink cartridge, the ink may have the following effects:
· Contact with skin or eyes may cause irritation.
· Inhalation may cause drowsiness or dizziness.
· Ingestion may cause nausea, vomiting, and/or diarrhea.
GERBERplotter MP Series User Manual
6