Gerber Technology GERBERplotter MP Series User Manual page 145

Click program History / PLOTTER error logger to see the plotter error history.
The plotter error logger displays plotter errors, along with the date, the plotter number, and description of the error.
Possible status descriptions shown in history
Failure: PH Motor
Failure: Paper motor
Failure: Internal antenna
Failure: Internal EEPROM
Failure: Finance program
Failure: Motor overcurrent protection
Failure: Encoder strip reading error
Incidence: Paper width sensor
Incidence: Paper alignment
Incidence: Overspeed
Incidence: Wrong PCB
Incidence: PLOTTER calendar
Incidence: Low power mode
Incidence: motor overcurrent protection
Incidence: encoder strip
GERBERplotter MP Series User Manual
Electrical or mechanical error on print head movement.
Electrical or mechanical incidence on paper movement.
Cannot access the contents of the internal chip.
Cannot access the contents of the internal memory.
Finance period exceeded.
Serious excess motor consumption for electrical or mechanical rea-
sons.
Serious error reading encoder strip. The encoder strip is dirty or de-
fective.
Error reading the paper position.
The paper has displaced horizontally while printing.
The print head has exceeded the maximum speed.
The main board configuration does not match the plotter.
Incorrect internal clock date.
Internal battery has been turned on after power failure.
Slight excess motor consumption for electrical or mechanical rea-
sons.
Error in reading the encoder strip. The encoder strip is dirty or defec-
tive.
135