Position Indication - Center Plate - Emerson FieldQ Series Product Data Sheet

Product data sheet
1.606.05 Rev. 0
October 2017
FieldQ Valve Actuator Options

Position Indication - Center Plate

Visual position indicator
FieldQ valve actuators can be equipped with a large visual posi-
tion indicator which allows clear indication of the valves position
at almost any position.
The FieldQ indicator is designed for position indication of
actuators mounted "in line" with the pipe line and mounted
"cross line" with the pipe line. To do this the inner part can be
removed, turned 90° and pushed back in place.
When supplied, the position indicator will be mounted "in line"
as standard. See data sheet 1.606.04 for other indicator mount-
ing options.
Specifications:
Material disk :
Material arrow :
Center plate for DIN3337 applications
FieldQ actuators can be equipped with a centre plate which
takes care that actuator and valve (or valve mounting kit) are
aligned when mounted. For most of the actuator sizes two
center plates are available.
Specifications:
Material plate :
FieldQ
Copyright © Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website
www.emerson.com/fieldq or from your Emerson Automation Solutions - Actuation Technologies Center:
America's: +1 281 477 4100 Europe: +36 22 53 0950 Asia/Pacific: +65 67 77 8211
Nylon PA6, Black
Nylon PA6, Yellow
Nylon PA6, Black
"In line"
Center plate
FieldQ™ actuator models
Q40 Q65 Q100 Q200 Q350 Q600 Q950 Q1600
Std F05 F05 F07
Option F07 F07 F05
FieldQ
"Cross line"
F10 F10 F12 F14
F07 F07 -/- -/-
F16
-/-