Emerson FieldQ Series Product Data Sheet page 60

Product data sheet
1.607.01 Rev. 2 Page 3 of 8
March 2019
Model String Configuration
Base Actuator
Actuator Type
Actuator Size
Connections
Spring Set
Temperature Range
Future Expansions
Assembly Code
Actuator Type
QD Double Acting
QS Spring Return
Actuator Size
0040 Size 40
0065 Size 65
0100 Size 100
0150 Size 150
0200 Size 200
Connections
M Metric Actuator (ISO 5211)
U Imperial actuator (ISO 5211 / UNC)
Spring Set (note5)
00 Double Acting
01 SpringSet 01
02 SpringSet 02
SpringSet 03
03
1x
Temperature Range (note 1)
ST Standard Temp. Range -20° to +80°C (-4° to 176°F)
HT High Temp. Range -20° to +120°C (-4° to 248°F)
Low Temp. Range -40° to +80°C (-40° to 176°F)
LT
Future Expansion
A Standard Yellow
Assembly Code (note 3)
CW Clockwise rotation (Spring to Close)
CC Counter-Clockwise rotation (Spring to Open)
Notes
1. Low and High temperature options are only available in combination with NAMUR plate option (QN)
2. The High Flow Plate includes the NAMUR Plate and can not be used with Control modules.
3. Assembly code CW is "Spring-to-Close", in combination with integrated modules.
Assembly code CC is "Spring-to-Open", in combination with integrated modules.
Failure mode of FieldQ with NAMUR plate depends on what solenoid is used.
4. See Insert Supplement for Additional Insert Options.
5. For the Full Stroke Adjustment option, replace the first "0" with a "1".
Example: Spring set "04" with full stroke will be "14", Spring set "03" with full stroke will be "13", etc.
FieldQ
Copyright © Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website
www.emerson.com/fieldq or from your Emerson Automation Solutions - Actuation Technologies Center:
America's: +1 281 477 4100 Europe: +36 22 53 0950 Asia/Pacific: +65 67 77 8211
QS 0350 - U 04 ST A CW
0350 Size 350
0600 Size 600
0950 Size 950
1600 Size 1600
04 SpringSet 04
05 SpringSet 05
SpringSet 06
06
Full stroke adjustment
- XX S27 0 D I
Valve Mounting
Visual Indication
Valve Flange
Insert Size
Pneumatic Interface
Pneumatic Interface (note 2)
XX Actuator suitable for Control modules
QN Actuator with NAMUR adaptation plate
H1 Actuator with with 1/2" High flow plate
Insert Size Code (note 4)
S10 Square 10 mm (0.39")
S12 Square 12 mm (0.47")
S14 Square 14 mm (0.55")
S16 Square 16 mm (0.63")
S17 Square 17 mm (0.67")
S19 Square 19 mm (0.75")
Valve Flange Code
00 ISO 5211 (No Centerplate)
05 DIN3337 F05 (Centerplate / insert @ 45°)
07 DIN3337 F07 (Centerplate / insert @ 45°)
10 DIN3337 F10 (Centerplate / insert @ 45°)
DIN3337 F12 (Centerplate / insert @ 45°)
12
14 DIN3337 F14 (Centerplate / insert @ 45°)
16 DIN3337 F16 (Centerplate / insert @ 45°)
Visual Indication Code
D Standard Indicator
No Indicator
X
Valve Mounting Code
I In line with the pipe line
C Cross line with the pipe line
FieldQ
S22 Square 22 mm (0.87")
S24 Square 24 mm (0.94")
S27 Square 27 mm (1.06")
S36 Square 36 mm (1.42")
S46 Square 46 mm (1.81")