Power Source & Network; Power Source; Network Communication - Prolon C1000 Series Hardware Manual

www.proloncontrols.com
POWER SOURCE & NETWORK
The C1000 controller is powered by the HVAC equipment's 24 VAC power supply by connecting the
common (''C'' wire) to the "COM" terminal block and the live (''R'' wire) to the "24 VAC" terminal block
(see Figure 8). The common for all inputs and outputs is the same as the power source's common. All
output power sources also originate from the controller's power source.
The ProLon C1000 Rooftop controller is primarily designed to work with ProLon zone controllers. When
they are networked the Rooftop and zone controllers all communicate in real-time. The network
connections are made using the network terminal blocks located on the C1000 controller (see Figure 9).
info@proloncontrols.com
www.proloncontrols.com
BASIC ROOFTOP HARDWARE GUIDE

Power Source

24Vac
Figure 8: Connecting the 24VAC power source

Network Communication

A
A
NET
B
Figure 9: Connecting to the network
1-877-9PROLON
PL-C1000 SERIES
( R )
To HVAC equipment terminal
( C )
Towards network
B
16
Montréal
1989 rue Michelin Laval,
QC H7L 5B7
TEL:(450) 973-5100
FAX: (450) 973-6186