Chrono-Thermostat Or Room Thermostat For; The Zone; H (Mm); No No - Sime MURELLE REVOLUTION 30 User, Installation And Servicing Instructions

– turn the encoder to select the "Climatic curve " row
Req. from ext. TA
Room probe run
Room probe modul.
Ext. probe modul.
Weather comp.curve
ˆ
Esc
– press the encoder to confirm the highlighted "Row"
and access the modifiable parameters.
Req. from ext. TA
Room probe run
Room probe modul.
Ext. probe modul.
Weather comp.curve
ˆ
Esc
– turn the encoder to select the preferred climatic curve
(from 1 to 9) according to the system requirements
– press the encoder to confirm the selection
– press the
Esc
m
CAUTION
The submenu "Hybrid func. status" is read-only.

5.14.2 Chrono-thermostat or room thermostat for

the zone

The chrono-thermostat or room thermostat for the zone must
be connected to terminals AT2 on the boiler control panel (gas
side).
To set the MULTIZONE system configuration, operate the main
control panel as described below.
From the "Main screen" :
Zone
Menu
– press the
Mode
select screen
– turn the encoder to select "Winter" mode
46
Zone heating
NO
YES
YES
YES
4.0
BACK
Zone heating
NO
YES
YES
YES
4.0
BACK
button to go back to the "Main screen".
Thu 18 Set 2014 10:30
Off
Mode
button to access the "Function mode"

Fig. 77

– press the click
– turn the
– press the
"Rows"
Fig. 78
– turn the
– press the click
go to the modifiable area
– turn the
– press the click
Fig. 79
– press the
and return to the "Main screen" .
Off
Summer Winter
Hot water MAN 40°C
Heating MAN 20.0°C
Holiday function OFF
Esc Back
encoder to confirm and access the "Rows"
encoder to select "Heating"
encoder to confirm "Heating" and access the
Summer Winter Off
Hot water MAN 40°C
Heating MAN 20.0°C
Holiday function OFF
Esc Back
encoder to select "Function mode"
encoder to confirm the "Function mode" and
Heating
Function Mode MAN
Set AUTO comfort 20.0°C
Set AUTO reduced 18.0°C
Set MAN 20.0°C
Program. Time [...]
Esc Back
encoder to select "OFF"
encoder to confirm
Heating
Function Mode MAN
Set AUTO comfort 20.0°C
Set AUTO reduced 18.0°C
Set MAN 20.0°C
Program. Time [...]
Esc Back
button to complete the modification
Esc
Fig. 80
Fig. 81
Fig. 82
Fig. 83