Lanner NCA-5710 User Manual page 102

NCA-5710 User Manual
Feature
PCI-E Port
Hot Plug Capable
Surprise Hot Plug
Capable
Link Speed
PCI-E Port
DeEmphasis
PCI-E Port Max
Payload Size
PCI-E ASPM
Support
Compliance Mode
Extra Bus Reserved
Reserved Memory
Reserved Memory
Alignment
Reserved
Prefetchable
Memory
Reserved
Prefetchable
Memory Alignment
64 bit Reserved
Prefetchable
Memory
64 bit Reserved
Prefetchable
Memory Alignment
Reserved I/O
Options
In auto mode the BIOS will remove the EXP port if
Auto
there is no device or errors on that device and
Enable
the device is not HP capable. Disable is used to
Disable
disable the port and hide its CFG space.
Enable This option specifies if the link is considered Hot
Disable Plug capable.
Enable This option specifies if the link is considered
Disable Surprise Hot Plug capable.
Auto
Gen 1 (2.5 GT/s)
Choose Link Speed for this PCIe port
Gen 2 (5 GT/s)
Gen 3 (8 GT/s)
-6.0 dB De-Emphasis control (LNKCON2[6]) for this PCIe
-3.5 dB port.
Auto
128B Set Maxpayload size to 256B if possible
256B
Auto
This option enables / disables the ASPM (L1)
L1 Only
support for the downstream devices.
Disable
Enable Disable/Enable Compliance Mode for this PCIe
Disable port
Extra Bus Reserved for bridges behind this Root
0
Bridge.
40 Reserved Memory Range for this Root Bridge.
1 Reserved Memory Alignment (0 - 31 bits)
Reserved Prefetchable Memory Range for this
40
Root Bridge.
Reserved Prefetchable Memory Alignment (0 - 31
1
bits)
64 bit Reserved Prefetchable Memory Range for
40
this Root Bridge.
64 bit Reserved Prefetchable Memory Alignment
1
(0 - 31 bits)
Reserved I/O (4K/8K/12K/16K/20K) Range for this
4
Root Bridge.
Description
102