Lanner NCA-5710 User Manual page 26

1. Align the PIN1 indicator on the
processor with that on the carrier.
Gently
2. insert one side of the
processor into the carrier and make
sure the alignment feature is aligned
with the latch of the carrier.
Note
During assembly, it is essential to have (1) PIN1 on the processor aligned with that on the carrier,
and (2) the alignment features on the top and the bottom of the CPU aligned with the
corresponding carrier latches.
3. For the other end of the carrier, align
the alignment feature
processor with the carrier latch, and
then gently bend over the carrier end
to have the latch secured on the
processor.
of the
26
Chapter 2: Hardware Installation
1
2
Latch
Align the
golden
fingers to
the PCIe
socket on
the
motherboa
rd carefully
while
3
inserting
this
module.
Latch
Align the
golden
fingers to
the PCIe
socket on
the
motherboa
rd carefully
while
inserting
this