Eth-Ring Port1 R-Aps Timeout; Eth-Ring Port1 Status; Eth-Ring Status; Fdb Full - NEC iPASOLINK EX Advanced Instruction Manual

CORRECTIVE MAINTENANCE

ETH-Ring Port1 R-APS Timeout

This condition is not an alarm. The message indicates that the time out for receiving
R-APS message occurs at the node that configures ETH-Ring where there are no
locked-out ports.

ETH-Ring Port1 Status

This condition is not an alarm. The message indicates the state changes of the port
that configures the ETH-Ring.

ETH-Ring Status

This condition is not an alarm. The message indicates the state of the ETH-Ring.

FDB Full

This condition is not an alarm. The message indicates that the FDB of the specified
VLAN is full.

Flow Control

This condition is not an alarm. The message indicates the status of indicates Ethernet
port regarding its flow control.

Frame ID

This condition indicates that the Frame ID (route differentiation ID) and its expected
value do not match.
iPASOLINK EX Advanced: O & M
PERATION AINTENANCE
5-31
ETH
ETH
ETH
BB
ETH
MODEM
GGS-000548-01E