Rstp/Mstp Setting; Select Stp Mode For Setting Procedure - NEC iPASOLINK EX Advanced Instruction Manual

8-86

8.7 RSTP/MSTP Setting




NOTE: STP/RSTP Tunnel function cannot be enabled on a port if it enables RSTP.

8.7.1 Select STP Mode for Setting Procedure

The setting windows for RSTP Mode and MSTP Mode differ. Select the appropriate
window for the mode using the following steps before starting the setting procedures.
Procedure 8-26
1. Launch and log in to
2. In the
3. Click
Figure 8-121 RSTP / MSTP Setting Window
GGS-000547-01E
: Spanning Tree Protocol
STP
: Rapid Spanning Tree Protocol
RSTP
: Multiple Spanning Tree Protocol
MSTP
WebLCT
MENU
frame on the left, expand
Function Setting
to select
window appears.
Modify STP Mode
.
Provisioning
RSTP/MSTP Setting
button.
Modify STP Mode button
iPASOLINK EX Advanced: S
Set ETH Function
, then its submenu
RSTP/MSTP Setting
. The
N S P
ET ETWORK AND YSTEM
ETH
ROVISIONING