NEC iPASOLINK EX Advanced Instruction Manual page 435

8-116
4. The
Figure 8-162 Add LAG Option Window
Parameter
Link Aggregation Group
LAG
LAG Name
Mode
[This option is for ETH
GRP only.]
TX Interval
[For LACP Mode only.]
GGS-000547-01E
option window appears. Assign the LAG:
Add LAG
Table 8-29 Add LAG Option Parameters (1 of 2)
Value Description
Indicates the type of registered ETH GRP.
(read only)
(text field) Enter the Link Aggregation Group name to apply. Valid value is 0 to
32 characters long.
LACP-Active
Outputs frames along the configured links regardless of settings on
the other side. Selecting this value enables the TX Interval option.
LACP-Passive
Outputs or not to output depending on the settings on the other side;
outputs frames if the other side's control value is Active.Selecting
this value enables the TX Interval option.
Static
Static operation mode using no LACP. Selecting this value enables
Revertive option.
Short
Sets the an output interval of LACPDUs mode for one second.
Long
Selects an output interval of LACPDUs mode for 30 seconds.
iPASOLINK EX Advanced: S
Set ETH Function
N S P
ET ETWORK AND YSTEM ROVISIONING