NEC iPASOLINK EX Advanced Instruction Manual page 170

SECURITY MANAGEMENT
Parameter
SNMP Version
PDU Type
IP Address
UDP Port
Community Name
Security Level
SNMP Engine ID
Auth Algorithm
Auth Key
Priv Algorithm
Priv Key
NOTE:
Security Level
registering SNMPv3 (inform).
iPASOLINK EX Advanced: S
Table 3-15 SNMP Trap Entry Parameters
Value Description
SNMPv1
Set SNMP Version for Trap.
SNMPv2c
SNMPv3
Trap
Available for all SNMP Versions.
Inform
SNMPv1 cannot select
xxx.xxx.xxx.xxx Enter the destination IP Address of Trap.
1 to 65535 Set UDP Port of Trap. [default: 162]
(text field) Enter Community Name of the Trap within 1 to 31 characters long.
This Community Name must be the same on both SNMP Server
and Agent.
NoAuthNoPriv
Allows a user to log in without authentication and encryption.
AuthNoPriv
A user needs authentication but no encryption to log in. Selecting
this option enables Auth Algorithm radio button below.
AuthPriv
A user needs authentication and data are encrypted by DES or
AES. Selecting this option enables Priv Algorithm radio button
below.
(text field) Assign a 16 byte value for SNMPv3 Local Engine ID, which must
be unique within the same managed network.
MD5 MD5 (Message-Digest algorithm 5) is one of the Hash Algorithm
for authentication and digital signature. In order to detect the falsifi-
cation of original data while transmitting, the Hash is generated
using the original data, which is compared at both ends of commu-
nication path.
SHA SHA (Secure Hash Algorithm) is one of the Hash Algorithm for
authentication and digital signature. In order to detect the falsifica-
tion of original data while transmitting, the 160-bit Hash is gener-
ated using the original data that is less than 2
compared at both ends of communication paths.
(read only) Valid value: Eight to 16 digits of MD5 or SHA1 public key. To enter
the Authentication Key, click Set Auth Key button on the tool bar.
DES
DES
The block size is 64 bits.
AES AES (Advanced Encryption Standard) is SPN-Structured block
encryption. The block size is 128 bits, and the length of the key is
128/192/256 bits.
Valid value: Eight to 16 digits. To enter the Privacy Key, click Set
(read only)
Priv Key button on the tool bar.
and
SNMP Engine ID
N S
ET ETWORK AND YSTEM
Inform
(Data Encryption Standard) uses a 56-bit encryption key.
are the only required parameters to set for
P
ROVISIONING
.
64
bits which is
GGS-000547-01E
3-25