Table of Contents
Advertisement
SECURITY MANAGEMENT
3.1.7 SFTP
SFTP (SSH File Transfer Protocol) securely transfers a file among NEs, using the
mechanism of SSHv2. iPASOLINK uses the SFTP Server to enable the following
functions:
3.1.7.1
In order to establish a secure network for uploading/downloading files, SFTP
function is provided.
3.1.7.2
Data upload and download service are available; however, downloading to
iPASOLINK is available only by the user(s) who is/are authorized to write data into
iPASOLINK. Only the designated directories can be accessed by SFTP. For files such
as F/W, FPGA, Configuration Data, etc., their storage path and file names are
designated as well, depending on their types.
If 90 seconds pass without any SFTP commands issued from the client, the session is
terminated by the SFTP Command Time Out.
3.1.7.3
Upon accepting the connection from external device, the system proceeds to the login
authentication process. An unauthorized user is denied.
If 90 seconds pass without any SFTP commands issued from the client, the session is
terminated by the SFTP Command Time Out.
SFTP uses the TCP Port #22 by default.
Changing the SSH Connection Port # requires special attention since the Port # of
SSH Connection and that of SFTP connection are the same (cannot change either one
alone).
3.1.7.4
iPASOLINK supports the internal authentication only.
iPASOLINK EX Advanced: S
Providing Function of Secure File Transfer
Data Upload/Download Service
Session Management
User Authentication Function
N
S
P
ET
ETWORK AND
YSTEM
ROVISIONING
3-9
GGS-000547-01E
Advertisement
Chapters
Table of Contents
