Laser Shutdown Control - NEC iPASOLINK EX Advanced Instruction Manual

CONTROL ITEMS

4.6 Laser Shutdown Control

This subsection describes the procedures to set up the Laser Management functions.
Following Laser management items can be enabled using WebLCT:
 Laser Shutdown Control
Forcibly shuts down the optical outputs.
 ALS Restart (for Remote Operation only)
For optical interfaces, the ALS (Automatic Laser Shutdown) control performs the
resumption of optical power for a definite period of time.
In addition, this function operates under ALS control execution (optical power
shutdown). If ALS is not activated, this operation is not carried out.
iPASOLINK EX Advanced: O & M
PERATION AINTENANCE
4-45
GGS-000548-01E