Table of Contents
Advertisement
Set ETH Function
4. Assign the appropriate value to each parameter:
Figure 8-126 RSTP Port Setting Option Window
Parameter
Enable
Item
Port
Port Name / LAG Name
STP Port Path Cost
STP Port Path Cost
(Value)
STP Port Priority
Edge Port
5. When completed, click the
6. Click the
Figure 8-127 Information Dialog Box
iPASOLINK EX Advanced: S
Table 8-22 RSTP Port Setting Parameter
Value
(check box)
(read only)
(read only)
(read only
Auto
Manual
1 to 200000000
0 to 240
Enable
Disable
OK
button to proceed.
The
RSTP / MSTP Setting
N
S
ET
ETWORK AND
YSTEM
Description
Tick the check box to select the target object.
Shows the information.
Enables the function to automatically calculate the path costs.
Selects to manually calculate and enter the path costs.
This filed is enabled by setting STP Port Path Cost to Manual.
Enter the cost manually.
Specifies the STP Port Priority. [granularity: 16]
Sets the target port to Edge Port.
Removes the Edge Port setting from the target port.
OK
Information
button.
window updates the information.
P
ROVISIONING
dialog box appears.
GGS-000547-01E
8-89
Advertisement
Chapters
Table of Contents
