Equipment Reset; Reset H/W - NEC iPASOLINK EX Advanced Instruction Manual

4-50

4.7 Equipment Reset

Following describes the hardware (H/W) and firmware (F/W) Reset Control of
iPASOLINK EX/A.
Reset control is available only when the system is set in the Maintenance mode. If it
is not in the Maintenance mode, executing the reset control will result in the error
response. Following are the objects that are available to be reset, and some
precautions:
H/W Reset Control
F/W Reset Control

4.7.1 Reset H/W

 Proceeding through the following procedure terminates the
Procedure 4-17
1. Click the
2. In the
GGS-000548-01E
Module
Equipment Reset
CPU Reset (RF)
CPU Reset (BB)
iPASOLINK EX/A.
Maintenance
system into the Maintenance Mode. The
changes to orange.
frame on the left, expand the
MENU
H/W F/W Reset Control
The H/W Reset Control
Resets the equipment hardware. Main
Ethernet signal will be interrupted during
the resetting process.
Resets CPU (Radio Frequency block FW).
Main signal will be interrupted during the
resetting process.
Resets CPU (Baseband block F/W). Main
Ethernet signals and NMS Communication
will be interrupted when the resetting
process.
tool button on the tool bar of the
MAINT
Maintenance Control
to select H/W Reset Control
window appears.
iPASOLINK EX Advanced: Operation & Maintenance
CONTROL ITEMS
Description
and restarts
WebLCT
WebLCT to put the
indicator on the tool bar
, then expand
.