NEC iPASOLINK EX Advanced Instruction Manual page 436

Set ETH Function
Parameter
Revertive
[For Static Mode only.]
Distribution
Rule
Link Aggregation Port
LAG
Port Role
5. When the parameters are specified, click the
6.
Figure 8-163 Information Dialog Box
iPASOLINK EX Advanced: S
Table 8-29 Add LAG Option Parameters (2 of 2)
Value Description
Revertive
Switches the active port back to the original port when recovered.
Non Revertive
Does not switch the active port back even if recovered.
L2 Base
Distribution is based on the Source & Destination MAC, VLAN ID,
Ethernet Type and Physical Port ID.
L3 Base
Distribution is based on the Source & Destination IP, Source &
Destination TCP/UDP Port number.
Not Used To assign the LAG, select ETH GRP.
ETH GRP
Active
Specify each port to Active/Standby. At least one port must be the
Active.
Standby
Information
dialog box appears. Click the
Link Aggregation Setting
The
N S
ET ETWORK AND YSTEM
OK
window updates the window.
P
ROVISIONING
OK
button.
button to proceed.
GGS-000547-01E
8-117