Update Controller Data - NEC iPASOLINK EX Advanced Instruction Manual

CONTROL ITEMS
4.9.2.5
NOTE: Proceeding through the following restarts the equipment, which terminates
the WebLCT connection.
Important:
1. Ensure that the data file of Controller Data has already been on the site.
2. Check the F/W versions using the Equipment Inventory Information window.
3. To operate the Controller data, the system must be set into the Maintenance
mode; Do not cancel the Maintenance mode while the download process is in
progress.
Procedure 4-26
1. Click the
2. In the
3. The
Figure 4-142 Update (Storage -> NE) Utility Window
iPASOLINK EX Advanced: O

Update Controller Data

Maintenance
system into the Maintenance Mode. The
changes to orange.
MENU frame on the left, expand the
(Storage -> NE) Utility
Update (Storage -> NE) Utility
by clicking its radio button, and then click the Execute tool button.
Execute tool button
& M
PERATION AINTENANCE
tool button on the tool bar of the
.
window appears. Select Controller Data
WebLCT
indicator on the tool bar
MAINT
Equipment Utility to select
Controller Data
GGS-000548-01E
4-87
to put the
Update