Add/Modify Ptp Logical Interface - NEC iPASOLINK EX Advanced Instruction Manual

9-10

9.2.2 Add/Modify PTP Logical Interface

NOTE: The maximum number of the Logical Interfaces to register differ depending
on the specified PTP Message Rate value. Contact NEC for the further
information.
Procedure 9-3
1. Launch and log in to
2. In the
3. Click the reference number in the PTP Logical Interface option box:
Figure 9-12 PTP Mode Setting Window
GGS-000547-01E
WebLCT
MENU
frame on the left, expand
Equipment Clock/Synchronization Setting
PTP Mode Setting
window appears.
PTP Logical Interface Setting
Set Equipment Clock and Synchronization
.
click
option window of the selected number appears.
iPASOLINK EX Advanced: S
Provisioning
, then its submenu
PTP Mode Setting
to select
N S
ET ETWORK AND YSTEM
. The
P
ROVISIONING