Table of Contents
Advertisement
NETWORK MANAGEMENT
Table 5-13 Forwarding Filter Entry (Modify) Parameters (2 of 2)
Parameter
Protocol
Source Port
Destination Port
Action
5. When completed, click the
6. Click the
Figure 5-67 Information Dialog Box
iPASOLINK EX Advanced: S
Value
Any
ICMP
TCP
UDP
Other
Any (check box)
1 to 65535
Any (check box)
1 to 65535
Permit
Deny
button to proceed.
OK
The
IP Access Control Setting
N
S
ET
ETWORK AND
YSTEM
Description
Select a Protocol for the IP Packets.
w Selecting Other requires to set port numbers.
w Selecting TCP or UDP enables the Source Port
and Destination Port options.
Check (leave a tick in) the check box to set no
specific port for the source.
Select a port for the source.
Check (leave a tick in) the check box to set no
specific port for the destination.
Select a port for the destination.
Forwards a packet that meets the conditions above.
Discards a packet that meets the conditions above.
button.
OK
Information
window updates the information.
P
ROVISIONING
dialog box appears.
GGS-000547-01E
5-45
Advertisement
Chapters
Table of Contents
