Parameter Access; Danfoss Specific Objects (2000H-5Fffh) - Danfoss CANopen VLT Midi Drive FC 280 Programming Manual

Parameter Access

5 Parameter Access

5.1 Danfoss Specific Objects (2000h-5FFFh)

All frequency converter parameters are accessible as OD
entries:
OD index = frequency converter parameter + 2000h.
Frequency converter parameter
Parameter 0-01 Language
5 5
–
Parameter 0-10 Active Set-up
Parameter 0-11 Programming Set-up
–
Parameter 1-00 Configuration Mode
Parameter 1-01 Motor Control Principle
–
Parameter 10-01 Baud Rate Select
–
Table 5.1 Converting Frequency Converter Parameters
Access the indexed parameters by accessing the
appropriate subindex of the OD index.
26
®
CANopen
CANopen OD index
2001h
–
200Ah
200Bh
–
2064h
2065h
–
23E9h
–
Danfoss A/S © 02/2016 All rights reserved. MG07E102