Henny Penny Evolution Elite EEG-16 Series Technical Manual page 17

Display Cause
"E-83-A" Pressure too
high.
"E-83-B" Pressure too
high.
"E-83-C" Pressure too high
"E-83-D" Pressure too
high.
"E-83-E" Pressure too
high.
"E-83-J" Bulk JIB FILL
switch on when
pressure too
high.
"E-83-R" Bulk Dispose
switch on when
pressure too
high.
"E-93-1" Autolift motor
"24 VDC malfunction or
SUPPLY failure.
TRIPPED"
Panel Board Correction
Check filter system in Vat #1.
Check filter system in Vat #2.
Check filter system in Vat #3.
Check filter system in Vat #4
Check filter system in Vat #5.
Check JIB fill valves.
Check Bulk Dispose quick-disconnect behind fryer.
If AutoLift feature is not operating, have each of the Auto-
lift motors checked.
5