Henny Penny Evolution Elite EEG-16 Series Technical Manual page 10

Test Point Pressure
Injector Size
This appliance must be installed in accordance with the manufacturer's instructions
and the regulations in force and only used in suitably ventilated location. Read the
instructions fully before installing or using the appliance.
For gas appliance installations in South Africa, the installation shall be carried out by a
registered installer, and the installation shall comply with requirements of SANS
10087-1 or SANS827 as applicable.
viii
Natural (I ) = 25 mbar
2L
Natural (I ) = 25 mbar
2HS
Natural (I
2E (43.46 - 45.3 mj/m (0°c))
3
Liquid Propane (I ) = 30/37/50 mbar (3.0/
3P
3.7/5.0 kPa)
Liquid Propane / Butane (I
3 B/P
mbar (3.0/3.7/5.0 kPa)
Natural (I ) = 8.7 mbar (0.87 kPa)
2H
Natural (I ) = 8.7 mbar
2E
Natural (I +) = N/A
2E
Natural (I ) = 8.7 mbar
2L
Natural (I ) = 8.7 mbar
2HS
Natural (I
2E (43.46 - 45.3 mj/m (0°c))
3
Liquid Propane (I ) = 25 mbar (2.5 kPa)
3P
Liquid Propane / Butane (I
3 B/P
(2.5 kPa)
Natural (I ) = 2.08 mm
2H
Natural (I ) = 2.08 mm
2E
Natural (I +) = 1.70 mm
2E
Natural (I ) = 2.30 mm
2L
Natural (I ) = 2.30 mm
2HS
Natural (I
2E (43.46 - 45.3 mj/m (0°c))
3
Liquid Propane (I ) = 1.30 mm
3P
Liquid Propane / Butane (I
3 B/P
) = 25 mbar
) = 30/37/50
) = 8.7 mbar
) = 25 mbar
) = 2.30 mm
) = 1.30 mm