Emotron VS10 Operation Instructions Manual page 218

The inverter can be configured as producer or as consumer to monitor up to four other
nodes.
Parameter Name / value range / [default setting]
0x1016:000 Consumer heartbeat time: Highest sub-index suppor-
(P520.00) ted
(Cons. heartbeat: Highest subindex)
Read only
0x1016:001 Consumer heartbeat time: Consumer heartbeat time
(P520.01) 1
(Cons. heartbeat: Cons. heartbeat1)
0x00000000 ... [0x00000000] ... 0x00FFFFFF
0x1016:002 Consumer heartbeat time: Consumer heartbeat time
(P520.02) 2
(Cons. heartbeat: Cons. heartbeat2)
0x00000000 ... [0x00000000] ... 0x00FFFFFF
0x1016:003 Consumer heartbeat time: Consumer heartbeat time
(P520.03) 3
(Cons. heartbeat: Cons. heartbeat3)
0x00000000 ... [0x00000000] ... 0x00FFFFFF
0x1016:004 Consumer heartbeat time: Consumer heartbeat time
(P520.04) 4
(Cons. heartbeat: Cons. heartbeat4)
0x00000000 ... [0x00000000] ... 0x00FFFFFF
0x1017 Producer heartbeat time
(P522.00) (Prod. heartbeat)
0 ... [0] ... 65535 ms
218
Info
Highest subindex, permanently set to 4. Corresponds at the same time
to the maximum possible number of nodes to be monitored.
Node ID and heartbeat time of node 1 which is to be monitored.
Format: 0x00nnhhhh (nn = node ID, hhhh = heartbeat time in [ms])
Node ID and heartbeat time of node 2 which is to be monitored.
Format: 0x00nnhhhh (nn = node ID, hhhh = heartbeat time in [ms])
Node ID and heartbeat time of node 3 which is to be monitored.
Format: 0x00nnhhhh (nn = node ID, hhhh = heartbeat time in [ms])
Node ID and heartbeat time of node 4 which is to be monitored.
Format: 0x00nnhhhh (nn = node ID, hhhh = heartbeat time in [ms])
Time interval for the transmission of the heartbeat telegram to the
consumer(s).
The heartbeat telegram is sent automatically as soon as a time > 0 ms is
set.
The set time is internally rounded up to the next multiple of 10 ms.
01-6203-01R3, CG Drives & Automation