Basic Setting; Mains Voltage - Emotron VS10 Operation Instructions Manual

6.

Basic setting

This chapter contains the most frequently used functions and settings to adapt the
inverter to a simple application based on the default setting.
• Mains voltage  90
• Control source selection  92
• Selection of setpoint source  93
• Starting/stopping performance  97
• Frequency limits and ramp times  100
• Quick stop  103
• S-shaped ramps  105
• Optical device identification  106

6.1. Mains voltage

The rated mains voltage set for the inverter has an impact on the operating range of the
inverter.
Details
By default, the rated mains voltage in
product code of the inverter.
Check the setting of the rated mains voltage in
matches the actual mains voltage applied!
Region inverter
EU VS10, 230 V, 1-phase
us VS10, 230 V, 1-phase
EU VS30, 230 V, 1/3-phase
US VS30, 230 V, 1/3-phase
EU VS30, 400 V, 3-phase
US VS30, 480 V, 3-phase
Notes regarding the table:
• The inverter types 400/480 V can be used with different mains voltages. For setting the
internal limit values, the rated mains voltage can be set in
user.
• If the inverter is reset to the delivery status, the rated mains voltage is also reset to the
default setting listed in the table according to the product code.
The following results from the rated mains voltage set:
• the error threshold for monitoring the DC-bus voltage and
• the voltage threshold for braking operation ("brake chopper threshold").
106
0x2540:001 (P208.01) is set according to the
0x2540:001
Product code
0x2000:001 (P190.01)
VS10-23-xxx-20
VS10-23-xxx-20
VS30-23-xxx-20
VS30-23-xxx-20
VS30-40-xxx-20
VS30-40-xxx-20
(P208.01). Ensure that it
Rated mains voltage
Default setting
230 Veff [0]
230 Veff [0]
230 Veff [0]
230 Veff [0]
400 Veff [1]
480 Veff [2]
0x2540:001 (P208.01) by the
01-6203-01R3, CG Drives & Automation
Possible settings
230 Veff [0]
230 Veff [0]
230 Veff [0]
230 Veff [0]
400 Veff [1], 480 Veff [2]
400 Veff [1], 480 Veff [2]