Table of Contents
Advertisement
CHANnel Subsystem
PROBe
PROBe
Command
:CHANnel<N>:PROBe <atten>
The PROBe command specifies the attenuation factor for an external probe
connected to a channel. The command changes the channel voltage
references such as range, offset, trigger level and automatic measurements.
The actual sensitivity is not changed at the channel input. The allowable
probe attenuation factor is an integer from 1 to 1000.
An integer from 1 through the number of channels in the oscilloscope
<N>
connected as one unit (maximum of 8 channels), otherwise the maximum
number of channels is 2.
An integer from 1 to 1000
<atten>
Example
OUTPUT XXX;":CHAN1:PROB 10"
Query
:CHANnel<N>:PROBe?
The PROBe query returns the probe attenuation factor for the selected
channel.
Returned Format
[:CHANnel<N>:PROBe]<atten><NL>
Example
OUTPUT XXX;":CHANNEL1:PROBE?"
4–8
Advertisement
Table of Contents
