Path; Slope - HP 16533A Programmer's Manual

TRIGger Subsystem

PATH

PATH
Command :TRIGger:[MODE PATTern;]PATH {CHANnel<N>|EXTernal}
The PATH command is used to select a trigger path for the subsequent
LOGic and LEVel commands. This command can only be used in the
PATTern trigger mode.
1 or 2
<N>
Example
OUTPUT XXX;":TRIGGER:PATH EXTERNAL"
Query
:TRIGger:PATH?
The PATH query returns the current trigger path.
Returned Format
[:TRIGger PATH] {CHANnel<N>|EXTernal}<NL>
Example
OUTPUT XXX;":TRIGGER:PATH?"

SLOPe

Command
:TRIGger:[MODE EDGE;SOURce
{CHANnel<N>|EXTernal};]SLOPe {POSitive|NEGative}
The SLOPe command selects the trigger slope for the specified trigger
source. This command can only be used in the EDGE trigger mode.
1 or 2
<N>
Example
OUTPUT XXX;":TRIG:SOUR CHAN1;SLOP POS"
Query :TRIGger:SLOPe?
9–12