Table of Contents
Advertisement
OFFSet
Command
:CHANnel<N>:OFFSet <value>
The OFFSet command sets the voltage that is represented at center screen
for the selected channel. The allowable offset voltage <value> is shown in
the table below. The table represents values for a Probe setting of 1:1. The
offset value is recompensated whenever the probe attenuation factor is
changed.
1 through the number of channels in the oscilloscope connected as one unit
<N>
(maximum of 8 channels), otherwise the maximum number of channels is 2.
allowable offset voltage value shown in the table below.
<value>
Vertical Range
16 mV - 400 mV
>400 mV - 1.6 V
>1.6 V - 10 V
>10 V - 40 V
Example
OUTPUT XXX;":CHAN1:OFFS 1.5"
Query
:CHANnel<N>:OFFSet?
The OFFSet query returns the current value for the selected channel.
1 through the number of channels in the oscilloscope connected as one unit
<N>
(maximum of 8 channels), otherwise the maximum number of channels is 2.
Returned Format
[:CHANnel<N>:OFFSet] <value><NL>
Example
OUTPUT XXX;":CHANNEL1:OFFSET?"
Offset Voltage
±2 V
±10 V
±50 V
±250 V
CHANnel Subsystem
OFFSet
4–7
Advertisement
Table of Contents
