Table of Contents
Advertisement
HP 16533/34A Oscilloscope Module
MESE <N>
Command
:MESE<N>
The MESE <N> command sets the Module Event Status Enable register bits.
The MESE register contains a mask value for the bits enabled in the MESR
register. A one in the MESE register will enable the corresponding bit in the
MESR, a zero will disable the bit.
The first parameter specifies the module, and the second parameter specifies
the enable value. 1...10 refers to the module in slot A...J.
Refer to table 1-2 for information about the Module Event Status Enable
register bits, bit weights, and what each bit masks for the module.
{1|2|3|4|5|6|7|8|9|10} number of slot where the module resides
<N>
integer 0 to 255
<enable_mask>
Example:
OUTPUT XXX;":MESE5 2"
Query
:MESE<N>?
The MESE query returns the current setting.
Returned Format:
[MESE]<enable_mask><NL>
Example:
10 OUTPUT XXX;":MESE5?"
20 ENTER XXX; Mes
30 PRINT Mes
40 END
<enable_mask>
Programming the
MESE <N>
1–11
Advertisement
Table of Contents
