Level - HP 16533A Programmer's Manual

TRIGger Subsystem

LEVel

LEVel
Command For EDGE trigger mode:
:TRIGger:[MODE EDGE;SOURce
{CHANnel<N>|EXTernal};]LEVel<value>
For PATTern trigger mode:
:TRIGger:[MODE PATTern;PATH
{CHANnel<N>|EXTernal};]LEVel<value>
The LEVel command sets the trigger level voltage for the selected source or
path. This command cannot be used in the IMMediate trigger mode. In
EDGE trigger mode, the SOURce command is used; in PATTern mode, the
trigger PATH is used for the trigger level source. The LEVel command in
PATTern trigger mode sets the high/low threshold for the pattern. LEVel for
EXT cannot be specified, LEVel is fixed at ECL levels.
<N> 1 or 2
Trigger level in volts
<value>
Example
For EDGE trigger mode:
OUTPUT XXX;":TRIG:MODE EDGE;SOUR CHAN1;LEV 1.0"
For PATTern trigger mode:
OUTPUT XXX;":TRIG:MODE PATTERN;PATH CHANNEL2;LEVEL 1.0"
9–8