Table of Contents
Advertisement
MEASure Subsystem
SOURce
SOURce
Command
:MEASure:SOURce CHANnel<N>
The SOURce command specifies the source to be used for subsequent
measurements. If the source is not specified, the last waveform source is
assumed.
1 through the number of channels in the oscilloscope connected as one unit
<N>
(maximum of 8 channels), otherwise the maximum number of channels is 2
Example
OUTPUT XXX;":MEASURE:SOURCE CHAN1"
Query
:MEASure:SOURce?
The SOURce query returns the presently specified channel.
Returned Format
[:MEASure:SOURce] CHANnel<N><NL>
Example
OUTPUT XXX;":MEASURE:SOURCE?"
7–10
Advertisement
Table of Contents
