11/07 Rev. 4.03-01
Basic Operations
1. Turn off the printer. Press and hold the FEED button.
2. Turn on the power.
3. READY indicator blinks, release FEED button.
4. The printer will perform a self test and print out a configuration report [3].
5. READY indicator stops blinking and lights up.
6. The following information will be printed on this report.
USER MANUAL
Printing a Configuration Report
After self test the printer will enter character dump mode. For normal opera-
tion press the CANCEL button to stop dump mode.
[3]
Configuration report.
AP 3.4
Commissioning and Operation
6