Remote Control / Display Module - Avery Dennison SNAP 500 Adidas User Manual

56

7.0 Remote Control / Display Module

All manuals and user guides at all-guides.com
If your AVERY DENNISON SNAP 500 printer is connected to a mainframe
rather than a personal computer, you may use the Remote Control / Display
module (see Figure 20) for various functions. This module serves as a standalone
controller and a printer status display so you can adjust the parameters of your
print runs and observe the current status of the printer. For example, you can
use the remote control / display module to do the following:
Start and stop the printer.
•
Change printer settings, such as the print and cut positions.
•
Enable / Disable the knife.
•
View the printer status, such as the number of labels printed and cut,
•
operating system version, and other features within the printer.
View error messages.
•
The Remote Control/Display Module can be connected and disconnected from
the printer with the printer on. This allows the use of one module with multiple
printers.
For more information, refer to the Remote Control / Display Module User's
Manual.
Figure 20. Remote Control / Display Module
User's Manual—SNAP™ 500 Adidas Printer