Table of Contents
Advertisement
Use the plastic utensil to press the L-shaped bar. The platen roller is released. You may
3.
need to slightly open the front cover to eject the platen roller.
Note:
Art is cut-away to show detail.
4.
Clean the platen roller and printhead using a cotton swab moistened with isopropyl alcohol.
5.
Allow time for the parts to dry.
Replace the platen roller.
6.
Snap the cover into place.
7.
Reload the labels. See
8.
C l e a n i n g t h e D i s p l a y
Make sure the printer is turned off when cleaning the display. Use a soft, lint-free cloth to
wipe the display.
Caution:
Do not use sharp objects or abrasive cleaners on the display; they can cause
damage.
C l e a n i n g t h e P r i n t e r
♦
Slightly dampen a cloth with water and wipe off the printer's case.
♦
Open the cover and use a dry, soft-bristled brush to remove paper dust.
Caution:
Do not use household cleaners to clean the printer.
5-2 Operator's Handbook
"Loading
Labels" in Chapter 1 for more information.
Hide quick links:
Advertisement
Table of Contents
