26
Tape Web Guide Knob
3.1.4 Using the Web Guide Hole Sensor
Web guide
center adjust
All manuals and user guides at all-guides.com
Figure 10. Tape Supply Through Knife and Stacker
The SNAP 500 for Adidas model is equipped with a hole sensing web guide
system. The system includes a pair of sensors that move in and out with the
web guide for "inside" edge hole sensing, and a pair of center mounted, fixed
sensors, for center hole sensing. The user can switch back and forth, between
the edge and center sensing positions by using the provided sensor switch.
See diagram below.
Hole sensor switch
In addition to the web guide hole sensors, the machine is equipped with a tool-
less, quick adjust web guide center system. To fine tune adjust center of print
User's Manual—SNAP™ 500 Adidas Printer
Feed Roller
Knife
Stacker
Upper Print Roller
Lower Print Roller
Web guide
bar with
sensors