User Safety; Receiving; Unpacking; Removing The Printer From The Carton - Avery Dennison SNAP 500 Adidas User Manual

User's Manual—SNAP™ 500 Adidas Printer

2.1.4 User Safety

2.2 Receiving

2.3 Unpacking

2.3.1 Removing the printer from the carton

All manuals and user guides at all-guides.com
Refer to your PCMate Platinum user's manual for proper installation procedures.
1. Follow all of the safety requirements and procedures established for your
facility.
2. Turn off the power to the printer before cleaning, servicing, or replacing any
components.
3. It is not necessary to turn off the power when loading or changing supplies.
CAUTION: Since the AVERY DENNISON SNAP 500 printer
has some pinch points; the machine has been designed to
protect these areas. To optimize printer operation and
performance, and to preserve the integrity of the
machine's safety features, AVERY DENNISON strongly
recommends that these features not be modified or
bypassed.
The AVERY DENNISON SNAP 500 printer-shipping carton weighs 65 pounds
(30 Kg). It is shipped in a large cardboard carton specially made to protect the
printer, and may be awkward or difficult to move by hand to its installation
location.
CAUTION: Do not remove the printer from the carton or
unpack in the shipping/receiving department.
1. Move the AVERY DENNISON SNAP 500 printer with a forklift, forkcart or
handcart to its intended location. It is easier and safer to use one of these
handling devices to move the printer. Leaving the printer in the carton while
it is being moved within your facility will help protect it until placed in its
new location.
2. The stacker, remote display/control unit and any other accessories
purchased for the printer may be shipped separately.
1. Open the carton from the top by removing the banding straps and/or cutting
the taped seam on the top of the carton.
2. Remove the foam-packing layer (see Figure 2).
11