Setting The Date And Time; Enabling Or Disabling The Cutter; Selecting The Print Speed - Avery Dennison SNAP 500 Adidas User Manual

All manuals and user guides at all-guides.com
44
User's Manual—SNAP™ 500 Adidas Printer
In the Virtual Control panel, access the Options tab. To select the printer
language, click on the arrow in the Language box to drop down a list of available
languages. Click on the desired language. Then click on Apply or Close to
activate the selected language.
On the Remote Front Panel, select Feature Menu-Language. Use the Yes and No
keys to select the desired language, and then press the Enter key.
Selecting the printer language does not change the
PCMate Platinum language. See the PCMate Platinum
manual for information about changing languages.

4.4.2 Setting the Date and Time

The AVERY DENNISON SNAP 500 printer has a built-in clock and calendar.
You may change the date and time as follows:
In the Virtual Control Panel, access the Options Tab. The current printer date
and time is shown. You may change the values in the Date or Time box, or you
can simply click on the Sync to PC button to set the printer to the same date and
time as the PC. Click on Apply or Close to set the printer date and time.
In the Remote Front Panel, select Feature-Date or Feature-Time. Change the date
or time and press enter to set the new value.

4.4.3 Enabling or Disabling the Cutter

You may disable the cutter in order to use an accessory such as a Rewinder. If
the cutter is enabled, it will cut according to the Cut Count selected in the format.
If the cutter is disabled, it will not cut.
If you have an optional Sonic Knife installed, it will be also
be enabled or disabled using this command.
In the Virtual Control Panel, access the Options Tab. Click on the arrow in the
Cutter box. Select Enabled to run the cutter or Disabled to turn the cutter off.
In the Remote Front Panel, select Feature – Cutter. Use the Yes and No keys to
select Enabled or Disabled, then press the Enter key.

4.4.4 Selecting the Print Speed

The print speed is normally set in the format. You may override the format
setting and specify the speed you want the printer to run. This is useful if you
have formats that were designed for other AVERY DENNISON printers.
In the Virtual Control Panel, select the Options tab. Click on the arrow in the
Print Speed box to drop down a menu of print speed choices. Click on the
desired choice and click on Apply or Close to set the print speed.