Alarm Reset - Fastech Ezi-Step Plus-R User Manual

12.3 Alarm Reset

If an alarm occurs, remove its cause and then release it. The alarm can be released as
follows. In case of alarms of which 'Reset'column is indicated to 'Invalid', power
must get downed prior to releasing the alarms.
Flash
Alarm Name
Count
1 Over Current
Over Speed
2
Step Out
3
Over
5
Temperature
Over
Regenerative
6
voltage
Motor Connect
7
error
Motor Voltage
9
error
11 System error
12 ROM error
Input voltage
14
error
Description
Check the mechanical status such as parameter setting,
motor's short-circuit,
machine edge is collided), etc.
Check parameter setting, and abnormal operation of the
motor.
Get down the load or increase the acceleration or
deceleration speed.
Get down the ambient temperature or install a cooling
fan.
In case of high-speed
acceleration or deceleration speed is low.
Check the connection status of drive and motor.
Check if power is supplied to the drive.
Check the green LED of CN5.
Check the green LED of CN5.
Check if power is supplied to the drive.
www.fastech.co.kr
12. Protective Function
or machine load (whether
operation, check if the
56
Reset
Valid
Valid
Valid
Valid
Valid
Invalid
Invalid
Invalid
Invalid
Invalid