SSANGYONG RODIUS 2005.07 Manual page 426

5. AIR QUALITY SYSTEM (AQS)
1) Components of AQS
Air Quality System (AQS) changes the air source selection to recirculation mode when polluted
air is detected through AQS sensor. The air source selection returns back to fresh air intake
mode after a specified period or the polluted air is disappeared.
AQS and air source selection switch
The AQS switch is integrated with the air source selection switch.
AQS sensor and ambient temperature
AUTO Mode
The air source is not changed when pressing the AQS and air
source selection switch in "AUTO" mode. However, the
indicator on the switch turned ON/OFF. In other words, the air
source cannot be changed to recirculation mode in AUTO mode
by just pressing the switch. To change the air source to
recirculation mode in AUTO mode, get into Manual mode first,
then press the air source selection switch.
Manual Mode
To change the AQS mode to Manual mode from AUTO mode,
use the MODE switch or the fan speed control dial. In Manual
mode, the "AUTO" symbol on the display is disappeared.
When pressing the AQS and air source selection switch, the
mode is changed in order of AQS LED ON, AQS LED OFF
(fresh air), and air source LED ON (recirculation).
The figure shows that the mode has been changed to the
recirculation mode from fresh air mode under AQS mode (AQS
LED ON) after detecting the polluted outside air.
0-17
6810-20
sensor
AQS sensor
Ambient
temperature
sensor
Connector
AIR CONDITIONING SYSTEM
RODIUS 2005.07