SSANGYONG RODIUS 2005.07 Manual page 199

▶
4H → 4L
- This function is only available when the speed signal from speed sensor is about to stop
(below 2 km/h).
- This function is only available when clutch pedal is depressed (manual transmission) or
selector lever is selected to "N"
(TCCU must recognize the clutch pedal signal or "N"
- Change the 4WD switch in instrument panel from 4H to 4L.
- "4WD LOW" warning lamp in meter cluster blinks during this process, then remains
when the shift is completed.
- "4WD CHECK" warning lamp comes on when the system is defective.
position (automatic transmission).
signal.)
0-17
0000-00
TRANSFER CASE
RODIUS 2005.07