SSANGYONG RODIUS 2005.07 Manual page 395

Multi-meter
Even in other modes, it is changed to the parking aid
screen when moving the gear selector lever into
"R" position.
Front monitor
When moving the gear selector lever into "R" position
while watching DVD or VCD, the rearview appears on
the front monitor.
ICM box
When moving the gear selector lever into "R"
position, the alarm buzzer in ICM box sounds (installed
at bottom of STICS).
Parking aid sensor(Rear bumper)
The three parking aid sensors send the distance data
between rear bumper and obstacle to PAS unit.
Rearview camera
The rearview camera sends the rearview to the monitor
by using wide angle lens.
PAS unit
It is a control unit for the parking aid system (PAS) and
transmits the signals from sensors to multimeter and
buzzer.(installed in tuner/amplifier bracket)
0-5
8790-04
PARKING AID SYSTEM
RODIUS 2005.07