SSANGYONG RODIUS 2005.07 Manual page 198

0-16
3410-01
8. SYSTEM OPERATION
1) Transfer Case Control Unit (Tccu)
(1) 4WD Operation
▶
2H → 4H
- Change the 4WD switch in instrument panel from 2H to 4H.
- This shift is available during driving.
- "4WD HIGH" indicator in meter cluster comes on.
When the system is defective
-
"4WD CHECK" warning lamp comes
on
▶
4H → 2H
- Change the 4WD switch in instrument panel from 4H to 2H.
- This shift is available during driving.
- "4WD HIGH" indicator in meter cluster goes out.
- "4WD CHECK" warning lamp comes on when the system is defective.
TRANSFER CASE
RODIUS 2005.07
TCCU is located under the front left seat and
permits the vehicle to shift from two-wheel
drive to four-wheel drive (and back shift)
according to drivers switch operation during
driving (For the shifting between 4WD HIGH
and 4WD LOW, stop the vehicle).